I've previously made a tailoring BOD tracking tool and have converted it into a blacksmith bod tracker now.
You can find it at the link here: https://docs.google.com/spreadsheets/d/ ... sp=sharing
Anyone can save the google sheet to their own account by clicking "File" and then "make a copy".
There are sepearte sheets for each material, and all you need to do is enter the quantities into columns M,N,O and P,Q,R. It will put the numbers automatically into the correct LBOD cells. If you have all the small BODs but not the large BOD, it will highlight the LBOD cell yellow, so you know which one you're missing. If you have the LBOD, but not all the small BODs, it will highlight them red. If you have all the smalls and the large it will highlight them all green.
You can also check the reward for any BOD, just go to the material page and put the details into cells E17, E18 and E19, BOD type can be blank or 0 for calculating small bods and "Ring", "Chain" or "Plate" for the large BODs. The cells below show the score and potential rewards. As some BODs fall in between point tiers, it shows you the nearest 2 tiers, unless it's bang on and it will just show the same reward twice.
This is a tool that I've made for myself, but hopefully it might be useful to some other people out there
If anyone has any comments or suggestions for improvment please let me know!