Excelsior

First, I'm very sorry is this is the wrong spot to post this... it just seemed to be the most logical.

Dose anyone have any issues running scripts with EasyUO? My personal issue is giveing me headaches I've gathered a few scripts from our local forms here and grabed EasyUO 1.5 but when I try to run them it dose nothing at all. I've applied the reg fixs, looked up and down the RunUO/EasyUO forms for any similor problems from other users there and have came up empty. I'm running Win7 64bit in case anyone is wondering. I've tried running EasyUO by its self with the client I downloaded from our wonderful shards front page, no luck. I've tried running razor hooked into the client then running EasyUo and still no luck.

I've double and even trippled checked the scripts to make sure that I copied all the code right and everthing is good. When I load the scripts in EasyUO everything seems fine, but then I hit the "play" botton or use the defult hotkey(F9) nothing happens at all. It just sits there ... like a bump on a log

I did manage to get it to work once while using Blaze's lock picking script by running the client with out razor and then opening up EasyUO and running the script. It worked once... at least ten times before I got that to work I had the issue discribed above and everytime after that one day I've had the same issue. As I said above I've looked all over the RunUO/EasyUO forms with no luck so I figured I'd ask here in hopes that someone might have some clue, idea or suggestions. Any help would be greatly welcome!

Thanks very much for any help anyone might be able to offer,
~Oriss

What compatibility setting are you running euo at? On Win7 64-bit I think I use the "compatible with XP SP3" for everything UO, including euo, the client, and razor.

Thanks much Tael, I'll give that a try! =) I just had them all set to run as admin and hadn't had any trouble out of UO/razor, but I'll set EUO to run was XP SP3 and see what happens