UOMAP Don't track to my character position

Don't know how something works? Here you will find some useful links. And if you have a question, feel free to ask.
Post Reply
Genesys
Novice Scribe
Posts: 5
Joined: Sun Oct 13, 2024 5:51 pm

UOMAP Don't track to my character position

Post by Genesys »

I opened the client by razor, I configured the uomap whit the IP, port and my name but when I'm in game, the position on uomap is static, only is positioned when I use a portal. How I resolve this problem?
User avatar
Johnny Warren
Legendary Scribe
Posts: 967
Joined: Mon Oct 11, 2010 11:40 pm

Re: UOMAP Don't track to my character position

Post by Johnny Warren »

I am not familiar with your problem. The built in map application in the Orion client is extremely powerful and easy to use. I would not solve your problem, but rather seek out the orion client and start from there.
JOHNNY WARREN!
Image
Jahn
Grandmaster Scribe
Posts: 73
Joined: Wed May 05, 2010 9:48 pm

Re: UOMAP Don't track to my character position

Post by Jahn »

IF I recall correctly you need to calibrate it, instructions are at https://uoam.net/uoamfaq.html#CALIBRATE
Genesys
Novice Scribe
Posts: 5
Joined: Sun Oct 13, 2024 5:51 pm

Re: UOMAP Don't track to my character position

Post by Genesys »

Johnny, thank you and I will try.
Jahn if I used the razor like say the page of uoex, don't permit me to calibrate manually, for that reason I can't use the sextant to calibrate.
And the map of razor the OUPS have the same problem in my case. I need some help, plase.
User avatar
Eremite
Elder Scribe
Posts: 130
Joined: Sat Jan 28, 2023 7:20 pm

Re: UOMAP Don't track to my character position

Post by Eremite »

Right click anywhere on the map and make sure that "Track Player" is checked.
Jahn
Grandmaster Scribe
Posts: 73
Joined: Wed May 05, 2010 9:48 pm

Re: UOMAP Don't track to my character position

Post by Jahn »

Razor won't stop you from using a sextant.
User avatar
Wil
Legendary Scribe
Posts: 1227
Joined: Mon Dec 30, 2013 1:19 pm
Location: Seattle, WA, USA
Contact:

Re: UOMAP Don't track to my character position

Post by Wil »

Genesys wrote:
Sat Oct 19, 2024 7:23 am
I opened the client by razor, I configured the uomap whit the IP, port and my name but when I'm in game, the position on uomap is static, only is positioned when I use a portal. How I resolve this problem?
I assume you mean UOAM.

Run both Razor AND UOAM as Administrator. Most communication failures between UO and UOAM are caused by not running as Administrator.

Set compatibility mode for both no higher than Windows 7.

In UOAM, in the "UO" menu, select "Track Player."
Genesys
Novice Scribe
Posts: 5
Joined: Sun Oct 13, 2024 5:51 pm

Re: UOMAP Don't track to my character position

Post by Genesys »

Finally I fix it. I calibrate manually without razor, then I can use it with and without razor.
Kinglark
Passer by
Posts: 1
Joined: Sat Dec 07, 2024 4:47 pm

Re: UOMAP Don't track to my character position

Post by Kinglark »

https://hizliresim.com/9lbzzxf
https://hizliresim.com/6nqxa4p

Hello friends, I am experiencing a problem with uomap.. I would be glad if you could help me..I am running as Windows 7 and administrator for image compatibility, but even if I select automatic track player, it does not follow me on the map..Even if I try to calibrate manually from the uo menu, it does not allow me to calibrate.. I would be grateful if you could help me.
Post Reply